Ride performance analysis of a mining dump truck using hydro-pneumatic and rubber suspension systems under different road surface conditions
177 viewsDOI:
https://doi.org/10.54939/1859-1043.j.mst.FEE.2023.183-189Keywords:
Mining dump truck; Hydro-pneumatic suspension system; Rubber suspension system; Ride comfort.Abstract
In order to analyze the ride performance on a mining truck using the hydro-pneumatic and rubber suspension systems under different road surface conditions, a dynamic model of a mining dump truck with 7 degrees of freedom is established under random excitation of road surface roughness. The weighted r.m.s acceleration responses at the vehicle body center of gravity in the vertical direction (awb), pitch angle (awphi) and roll angle (awteta) according to ISO 2631-1 are selected as the objective functions. The analysis results showed that the awb, awphi and awteta values with the hydro-pneumatic suspension system decrease respectively compared to the rubber suspension system under surveyed road surface conditions, which means that the ride performance of the mining dump truck with hydro-pneumatic suspension system is significantly improved compared to rubber suspension system when the vehicle moves under different road surface conditions.
References
[1]. Le Van Quynh et al.,"Effects of suspension design parameters of a semi-trailer truck on vehicle ride comfort and road surface friendliness" Adva. In Engi. Re and App. pp. 281-289, (2019). DOI: https://doi.org/10.1007/978-3-030-37497-6_32
[2]. Le Van Quynh, “Comparing the performance of suspension system of semi-trailer truck with two air suspension systems”, Vibroengineering PROCEDIA, Vol. 14, p. 220-226, (2017). DOI: https://doi.org/10.21595/vp.2017.19224
[3]. Nguyễn Trung Kiên, “Nghiên cứu điều khiển giảm chấn từ trường trong hệ thống treo bán tích cực trên ô tô con”, Luận án tiến sĩ, Đại học Bách khoa Hà Nội, (2023).
[4]. Le Xuan Long et al., "A Comparison of Ride Performance of Hydro-Pneumatic Suspension System with Those of Rubber and Leaf Suspension Systems," IOP Conf. Ser.: Mater. Sci. Eng. 914 012037, (2020). DOI: https://doi.org/10.1088/1757-899X/914/1/012037
[5]. Le Xuan Long et al., "Ride Performance Evaluation of Air and Hydro-Pneumatic Springs of Suspension System," International Journal of Advanced Research in Engineering and Technology (IJARET), Vol.12(1), pp.439-447, (2021).
[6]. Gong, B., Guo, X., Hu, S., and Xu, L., "Ride comfort optimization of a multi-axle heavy motorized wheel dump truck based on virtual and real prototype experiment integrated Kriging model”. Advances in Mechanical Engineering, Vol. 7, (2015). DOI: https://doi.org/10.1177/1687814015584257
[7]. Qi, H., Chen, Y., Zhang, N., Zhang, B., Wang, D., and Tan, B., "Improvement of both handling stability and ride comfort of a vehicle via coupled hydraulically interconnected suspension and electronic controlled air spring," Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, (2019). DOI: https://doi.org/10.1177/0954407019856538
[8]. Wang, S., Lu, Z., Liu, X., Cao, Y., and Li, X,"Active control of hydropneumatic suspension parameters of wheel loaders based on road condition identification," International Journal of Advanced Robotic Systems, vol.15(6), (2018). DOI: https://doi.org/10.1177/1729881418817425
[9]. Yin, Y., Rakheja, S., et al., "Hydraulic damping nonlinearity of a compact hydro-pneumatic suspension considering gas-oil emulsion " Vibroengineering PROCEDIA, Vol. 30, pp. 68-71, (2020). DOI: https://doi.org/10.21595/vp.2019.20715
[10]. Zhou Changfeng, “Dynamic modeling, optimization and experimental research of rubber suspension system of off-road vehicle”, A dissertation submitted to Southeast University for the academic degree of doctor of engineering, (2007).
[11]. ISO 8068. Mechanical vibration-Road surface profiles - reporting of measured data, (1995).
[12]. ISO 2631-1, “Mechanical vibration and shock-Evanluation of human exposure to whole-body vibration”, Part I: General requirements, The International Organization for Standardization, (1997).
