EFFECT OF BOATTAIL GEOMETRY ON FLOW STRUCTURE AND DRAG OF AXISYMMETRIC BODY

256 views

Authors

  • Tran The Hung (Corresponding Author) Khoa Hàng không vũ trụ, Trường Đại học kỹ thuật Lê Quý Đôn

Keywords:

Aerodynamic drag; Separation flow; Boattail.

Abstract

 This study presents effect of boattail model on flow behavior and drag of axisymmetric model at low-speed conditions. Boattail geometry with different length and angle was investigated by numerical approach. This study uses Reynolds-averaged Navier-Stokes equations with turbulent model k- ω. The numerical process was conducted at Le Quy Don Technical University. Numerical results showed that boattail geometry strongly affects drag of the model. At high boattail angle, separation flow occurs on the surface and increases drag of the model. Distributions of velocity, pressure, skin friction on the boattail surface were investigated and presented in details in this study.

References

[1]. R.A. Merz, “Subsonic axisymmetric near-wake studies,” AIAA Journal, Vol.16, No.7 (1978), pp.656-662.

[2]. G. Rigas, A.R. Oxlade, A.S. Morgans, J.F. Morrison. “Low-dimensional dynamics of a turbulent axisymmetric wake,” Journal of Fluid and Mechanics, Vol.755, R5 (2014).

[3]. P.R. Viswanath, S.R, Patil, “Zero-lift drag characteristics of afterbodies with a square base,”, Journal of Spacecraft and Rockets, Vol.34, No.3 (1997), pp.290-293.

[4]. G.N, Lavrukhin, K.F, Popovich, “Aero-gazadynamics of jet nozzles - flow around the base,” TSAGI, Moscow Russia (written in Russian), Vol.2 (2009).

[5]. W.A. Mair, “Reduction of base drag by boat-tailed afterbodies in low speed flow,” Aeronautical Quarterly, Vol.20 (1969), pp.307-320.

[6]. A. Mariotti, G. Buresti, G. Gaggini, M.V. Salvetti, “Separation control and drag reduction for boat-tailed axisymmetric bodies through contoured transverse grooves,” Journal of Fluid Mechanics, Vol. 832 (2017), pp.514-549.

[7]. T. H. Tran, T. Ambo, T. Lee, L. Chen, T. Nonomura, K. Asai, “Effect of boattail angles on the flow pattern on an axisymmetric afterbody surface at low speed,” Experimental Thermal and Fluid Science, Vol.99 (2018), pp.324-335.

[8]. T. H. Tran, H. Q. Dinh, H. Q. Chu, V. Q. Duong, C. Pham and V.M. Do, “Effect of boattail angle on near-wake flow and drag of axisymmetric models: A numerical approach,” Journal of Mechanical Science and Technology, Vol.35, No.2 (2020).

[9]. D.C. Wilcox, “Reassessment of the scale-determining equation for advanced turbulent models,” AIAA Journal, Vol.26, No. 11 (1988).

[10]. F.R. Menter, “Zonal two equation k-ω turbulence models for aerodynamic flows,” AIAA Paper (1993), pp.93-2906.

Published

12-04-2021

How to Cite

Hùng. “EFFECT OF BOATTAIL GEOMETRY ON FLOW STRUCTURE AND DRAG OF AXISYMMETRIC BODY”. Journal of Military Science and Technology, no. 72, Apr. 2021, pp. 136-42, https://online.jmst.info/index.php/jmst/article/view/56.

Issue

Section

Research Articles

Most read articles by the same author(s)

<< < 1 2