The influence of heat treatment parameters in grain boundary engineering on the microstructure and properties of stainless steel 316L
59 viewsDOI:
https://doi.org/10.54939/1859-1043.j.mst.90.2023.150-155Keywords:
Stainless steel 316L; Grain boundary engineering; Intergranular corrosion; Twin boundaries.Abstract
In this research, the authors used the grain boundary engineering technique as a technological solution to improve the corrosion resistance of stainless steel 316L. The steel sample, after being processed using the grain boundary engineering technique, generates a significant amount of twin boundaries (a typical form of small-angle grain boundaries), which effectively enhances the intergranular corrosion resistance of stainless steel 316L. With a selected deformation amount of 10%, the experimental results indicated that at a temperature of 1150 °C and a holding time of 30 minutes, the processed steel sample exhibited better corrosion resistance compared to the untreated steel sample. Additionally, it showed the highest corrosion resistance among the experimentally processed samples under different parameter conditions.
References
[1]. Tingguang Liu, Shuang Xia, Bangxin Zhou, Qin Bai, “Three–dimention characteristics of the grain boundary networks of conventional and grain boundary engineered 316LL stainless steel,” Materials Characterization, 133, pp. 61–70, (2017).
[2]. Zilong Zhang, Shuang Xia, “Effects of 3-D grain boundary geometrical angles and the net normal stress on intergranular stress corrosion cracking initiation in a 316L stainless steel,” Materials Science & Engineering A, pp. 52-58, (2019).
[3]. M. Shimada, H. Kokawa, Z. J. Wang, Y. S. Sato, I. Karibe, “Optimization of grain boundary character distribution for intergranular corrosion resistant 304 stainless steel by twin-induced grain boundary engineering,” Acta Materialia, 53, pp. 2331-2341, (2002).
[4]. Trần Văn Nghĩa, Phùng Tuấn Anh, “Nghiên cứu ảnh hưởng của thời gian ủ kết tinh lại đến tính năng chống ăn mòn của thép không gỉ Austenit AISI 304 sau Laser xung kích,” Tạp chí Khoa học và Công nghệ Hàng hải, Số 43, pp. 32-38, (2015).
[5]. V.Randle, “Grain boundary engineering: An overview after 25 years,” Materials science and technology, 26(30), pp. 253-260, (2012).
[6]. V.Randle, “Role of grain boundary plane in grain boundary engineering,” Materials science and technology, 26(7), pp. 253-260, (2010).
[7]. Callister, “Materials science and engineering: an introduction; 7th ed,” John Wiley & Sons, pp. 644 – 648, (2007).
