Study on the anti-corrosion performance of multi-functional additives used in coolant for solder material
212 viewsDOI:
https://doi.org/10.54939/1859-1043.j.mst.79.2022.82-88Keywords:
Coolant; Ethylene glycol; Corrosion inhibitors; Electrochemical analysis.Abstract
This work presented the corrosion protection performance of anticorrosion multi-metal hybrid (AC-2MH) complex additive for solder materials in corrosive media. The AC-2MH complex contained traditional additives and organic acids. The Electrochemical impedance spectroscopy results demonstrated the formation of active and passive protective layers on the surface of the alloys, which prevented the solder materials from corrosion. The electrochemical analysis also indicated that the multifunctional additive had the capability of inhibiting the corrosion rate up to 97-99% under normal conditions (30-40 oC). At high temperatures (60-70 oC), the corrosion inhibition efficiency was significantly reduced to 89-94%.
References
[1]. B. K. A. Agrawal, M. H. Luesse, and K. W. O'Haver, "Active phased array antenna development for modern shipboard radar Systems". Johns Hopkins Apl Technical Digest, vol. 22, pp. 600-613, 2001.
[2]. E. C. S. R.K. Shah, R.A. Mashelkar, "Heat Transfer Equipment Design". Taylor & Francis, 1998.
[3]. G. Argade et al., "Corrosion Behavior of Alloyed Cast Iron in Ethylene Glycol-Based Engine Coolants at Elevated Temperature", vol. 11, no. 3, p. 357, 2021.
[4]. O. K. Abiola and J. Otaigbe, "Effect of common water contaminants on the corrosion of aluminium alloys in ethylene glycol–water solution", Corrosion Science, vol. 50, no. 1, pp. 242-247, 2008.
[5]. J. K. I. a. S. O. K. Iwakata, "Development of Non-Amine Type Engine Coolant". Komat’s Technical Report, vol. 48, no. 149, 2002.
[6]. I. D. M. N. Khomami, A. A. Attar, and M. Peykari, "Corrosion of Alloy Steel in 30% Ethylene Glycol Solution and CrO24 Under Hydrodynamic Condition". Journal of Iron and Steel Research, International, vol. 20, no. 6, pp. 82-87, 2013.
[7]. N. N. A. W. Zhou, A. Choudhary, and M. Kanouni, "Evaluation of corrosion resistance of magnesium alloys in radiator coolants". Corrosion Engineering, Science and Technology, vol. 46, no. 4, pp. 386-391, 2011.
[8]. Y. Z. M. Asadikiya, and M. Ghorbani, "Corrosion Study of Aluminum Alloy 3303 in Water-Ethylene Glycol Mixture: Effect of Inhibitors and Thermal Shocking". International Journal of Corrosion, vol. 2019, p. 9020489, 2019.
[9]. G. P. M. Santambrogio, M. Trueba, S. P. Trasatti, and M. P. Casaletto, "Effect of major degradation products of ethylene glycol aqueous solutions on steel corrosion". Electrochimica Acta, vol. 203, pp. 439-450, 2016.
[10]. H. E. A. Haroooni, M. H. Maddahy, I. Danaee, and S. Nikmanesh, "Corrosion behavior of 6063 aluminum alloy in ethylene glycol-water solution". Iranian Journal of Materials Science and Engineering, vol. 12, pp. 34-44, 2015.
[11]. M. S. a. S. Tamir, "New engine coolant for corrosion protection of magnesium alloys". Materials and Corrosion, vol. 57, no. 4, pp. 345-349, 2006.
[12]. N. T. Huong, N. N. Son, P. T. T. Hanh, N. V. Dong, and T. D. Hoanh, "Study on effect of temperature and content on effective corrosion inhibitors of multi-metal additive system used in ethylene glycol-based coolant," Journal of Military Science and Technology, no. 76, p. 6, 2021.
[13]. M. M. J. Zaharieva, M. Mitov, L. Lutov, S. Manev, and D. Todorovsky, "Corrosion of aluminium and aluminium alloy in ethylene glycol–water mixtures", Journal of Alloys and Compounds, vol. 470, no. 1, pp. 397-403, 2009.
