The influence of the tempering temperature on the structures and the mechanical properties of the high-strength alloy steel 12Cr2NiW
206 viewsDOI:
https://doi.org/10.54939/1859-1043.j.mst.80.2022.100-105Keywords:
Heat treatment; Alloy steel; Special steel; Tempering process; Tempering structure steel.Abstract
Quenched steel 12CrNiWV (after hardening at 910 oC) needs to apply tempering to eliminate stress and to equalize the structure of steel before operation. A highly stressed state and low plasticity after hardening cause a direct danger for the parts, especially under heavy load, the material tends to be a brittle fracture. The choice of tempering to complete the heat treatment process is an important issue for special steels. The experimental results of the article direct towards a reasonable tempering regime, so that alloy steel 12CrNiWV can develop its ability in high-tech industries such as mechanical engineering, aircraft engineering, and aerospace technology.
References
[1]. В.С. Кушнер, Д.А. Негров, О.Ю. Бургонова и др, “Материаловедение и технология конструкционных материалов”, Омск: Изд-во, ОмГТУ, с. 447, (2012).
[2]. С.А. Никулин, В.Ю. Турилина, “Материаловедение и термическая обработка”, 2-е изд., перераб. и доп., М.: Изд. Дом МИСиС, 171с, (2013).
[3]. А.С. Зубченко (ред.), “Марочник сталей и сплавов”, 2-е изд., перераб. и доп, М.: Машиностроение-1, 784с, (2003).
[4]. А.А. Ковалева, Е.С. Лопатина, В.И. Аникина и др, “Специальные стали и сплавы”, СФУ, 232c, (2016).
[5]. Ю.М. Лахтин, В.П. Леонтьева. “Материаловедение”, 3-е изд., перераб. и доп., М.: Машиностроение, 528с. Ил, (1990).
[6]. 吴承建, 陈国良, 强文江, “金属材料学” (第2版). 冶金工业出版社, (2009), 436页.
[7]. George E. Totten, “Heat treatment metallurgy and technologies”, Portland State University Portland, Oregon, (2006).
[8]. V.Yu. Turilina (Edited by professor S.A. Nikulin), “Material Science: Mechanical properties of metals. Heat treatment of metals. Special steels and alloys”, MISiS Publishing House, p. 154, (2013).
[9]. 崔振铎，刘华山, “金属材料及热处理”, 中南大学出版社, (2019).
