STUDY ON THE EFFECT OF BARREL LENGTHON SOME INTERIOR BALLISTIC CHARACTERISTICS FOR THE PISTOL IN 7.62 mm CALIBER
314 viewsDOI:
https://doi.org/10.54939/1859-1043.j.mst.75.2021.148-156Keywords:
Interior ballistic; Barrel length; Pistol; 7.62x25 mm ammo; 7.62 mm K14VN pistol; 7.62 mm K54 pistol.Abstract
This paper focuses on establishing a mathematical model to study the effect of barrel length on the muzzle pressure, the muzzle velocity, and the time the bullet moves in the barrel. This model was applied to the calculation for 7.62 mm K54 pistols with three different barrel lengths of 116 mm (7.62 mm K54 pistol origin), 120 mm , and 127 mm (7.62 mm K14VN pistol). The biggest deviation between the calculated results of the model and the results of solving the system of differential equations of internal ballistic is 1.69% (for the muzzle pressure) and 0.25% (for the muzzle velocity); Besides, the muzzle velocity values were compared with the experimental results for the 7.62 mm K54 VN and 7.62 mm K14VN pistols. The comparison results showed the reliability of the mathematical model.
References
[1]. https://en.wikipedia.org/wiki/7.62%C3%9725 mm _Tokarev
[2]. “Tập bản vẽ súng ngắn 7,62 mm K14 VN”, Nhà máy Z111/TCCNQP.
[3]. Çelikel, Adnan & Günay, Yasemin & Uner, Bulent & Bal, Cengiz. (2012). “The Effect of Barrel Length on Pellet Dispersion”. Turkish Journal of Forensic Medicine. 26. 115-123. 10.5505/adlitip.2012.84803.
[4]. Mohazzabi, P & Shefchik, B. (2011). “The optimal length of a rifle barrel”. Canadian Journal of Physics. 80. 541-550. 10.1139/p01-147.
[5]. Maitre, Matthieu & Chiaravalle, Analisa & Horder, Mark & Chadwick, Scott & Beavis, Alison. (2021). “Evaluating the effect of barrel length on pellet distribution patterns of sawn-off shotguns”. Forensic Science International. 320. 110685. 10.1016/j.forsciint.2021.110685.
[6]. N. N. Du, Đ. V. Thọ. “Thuật phóng trong của súng pháo”. Học viện Kỹ thuật Quân sự (1976).
[7]. Nguyen, V. H., Dao, V. D., Nguyen, V. D., & Do, D. L. (2021). “A Thermodynamic Model for interior ballistics of an amphibious rifle”. Journal of Science and Technique, (209).
[8]. “Điều kiện kỹ thuật nghiệm thu súng ngắn 7,62 mm K54”, Nhà máy Z111/TCCNQP.
[9]. G.A. Đanhilin, V.P. Ogorodnhicov, A.B. Davolocin, Người dịch: Nguyễn Văn Thuỷ, Trần Văn Định, Trần Đình Thành (2007), “Cơ sở thiết kế đạn súng bộ binh”, Học viện Kỹ thuật Quân sự.
