COMPOSITONAL ANALYSIS OF MATERIAL USED MANUFACRURING IMPORTED BEARING
137 viewsDOI:
https://doi.org/10.54939/1859-1043.j.mst.75.2021.80-85Keywords:
Compositional analysis; Bearing material; Nitril rubber.Abstract
The compositions of material of imported bearing was determined. Material sample was treated by Soxhle extratrion and pyrolysis methods, then characterized by some techniques such as: Infrared spectrocopy (IR), thermo gravity analysis (TGA) and gas chromatography/mass spectrometry (GC/MS). The experimental results showed that the bearing material includes nitril rubber, DOP plasticizer and inorganic fillers and additives. The organic content is 65,231%, carbon black is 24,121% and organic ash is 10,666% with 15% MoS2.
References
[1]. Roy L. Orndorff, “Water-lubricated rubber bearings: history and new developments”, Naval Engineers Journal, (1985) (10), pp. 39 - 52..
[2]. Litwin Wojciech, “Influence of surface roughness topography on properties of water-lubricated polymer bearings: Experimental research”. Tribology Transactions, (2011), 54, pp. 351-361.
[3]. Roy L.Orndorff, Darren G Finck, “New design, cost effective, high performance water-lubricated bearing”, Warship, (1996), pp. 367-373.
[4]. https://www.duramaxmarine.com/johnson-cutless/water-lubricated-bearings-product-line.htm
[5]. International Standard ISO 9924 - Rubber and rubber product: determination of the compositons of vulcanizates and uncured compounds by thermogravimetry.
[6]. International Standard ISO 4650- Rubber - Identification - Infrared spectrometric methods.
[7]. Victor M. Livinov, Prajna P. De, “Spectroscopy of rubber and rubber materials”, Rapra Technology LTD, 2002.
[8]. Nguyễn Đình Dương, Võ Hoàng Phương, Nguyễn Việt Hưng, et al, “Phân tích thàn phần vật liệu cao su gioăng làm kín cửa ra vào tàu ngầm Kilo 636M”, Tạp chí Nghiên cứu Khoa học và Công nghệ quân sự, (2019), số 60, pp. 140-146.
[9]. Phạm Minh Tuấn, Đặng Trần Thiêm, Phạm Như Hoàn, et al, “Phân tích thành phần lớp cao su cách âm của tàu ngầm Kilo 636M”, Tạp chí Nghiên cứu Khoa học và Công nghệ quân sự, (2018), số 55, pp. 183-189.
[10]. Pappa, A., Mikedi, K., Agapiou, et al, “TG–MS analysis of nitrile butadiene rubber blends (NBR/PVC)”. Journal of Analytical and Applied Pyrolysis, (2011), 92(1), pp. 106-110.
[11]. Kuang Fuming, Zhou Xincong, Huang Jian, et al, “Tribological Properties of Nitrile Rubber/UHMWPE/Nano-MoS2 Water-Lubricated Bearing Material Under Low Speed and Heavy Duty”, Journal of Tribology, (2018), Vol. 140, 061301, pp. 1-11.
[12]. Conglin Dong, ChengqingYuan, Lei Wang, et al, “Tribological Properties of Waterlubricated Rubber Materials after Modifcation by MoS2 Nanoparticles”, Nature Scientific Reports, (2016), Vol. 6, pp. 1-12.
