Research on the material composition and performance of Li-Si/FeS2 thermal batteries
169 viewsDOI:
https://doi.org/10.54939/1859-1043.j.mst.94.2024.86-93Keywords:
Thermal battery; Li-Si alloys; Fe-KClO4 heat powder.Abstract
Thermal batteries are disposable storage batteries that use electrolytes that are molten inorganic salts in the temperature range of 400 ÷ 550 oC. Along with the development of science and technology, thermal batteries are constantly being researched to improve technical features, such as reducing activation time and mass, while increasing capacity, energy density, working duration, storage time, and ability to withstand harsh working conditions. In this article, we present the results of a study on the chemical composition of Li-Si/FeS2 thermal batteries and the performance of a single cell as well as a full battery. The analysis shows that the thermal battery utilizes pellet pressing technique. The anode is made of FeS2, the cathode is made of Li-Si alloy, the electrolyte is a mixture of LiCl and KCl, and the pyrolysis agent is Fe:KClO4. A single cell's voltage is 1,8 V, and a full thermal battery's voltage is 22 V at a 1,5 A discharge current.
References
[1]. Masset, P. J. and Guidotti, "Thermally activated (“thermal”) battery technology: Part I: An overview", Journal of Power Sources 161(2):1443-1449. DOI: https://doi.org/10.1016/j.jpowsour.2006.06.013
[2]. Qing Chang, Zeshunji Luo, Licai Fu, "A new cathode material of NiF2 for thermal batteries with high specific power", Electrochimica Acta, Volume 361, 137051, (2020). DOI: https://doi.org/10.1016/j.electacta.2020.137051
[3]. Masset, P. J. and Guidotti, R. A. “Thermal activated (“thermal”) battery technology. part II. molten salt electrolytes”, J. Power Sources, 164 (1), 397, (2006).
[4]. Masset, P.J. and Guidotti, R. A. “Thermal activated (“thermal”) battery technology. part IIIb. sulfur- and oxide-based cathode materials” J. Power Sources, in press, (2007).
[5]. Patrick J.Masset, Ronald A. Guidotti, "Thermally activated (Thermal) battery technology, part IIIa; FeS2 cathode material", Journal of Power Sources, 177, 595-609, (2008). DOI: https://doi.org/10.1016/j.jpowsour.2007.11.017
[6]. R.A. Guidotti, P.J.Masset. "Thermally activated (Thermal) battery technology, Part IV. Anode materials", Journal of power sources, 183, 388-398 (2008). DOI: https://doi.org/10.1016/j.jpowsour.2008.04.090
[7]. Renyi Li, Wei Guo, "Recent Developments of Cathode Materials for Thermal Batteries", Electrochemistry, Volume 10, (2022). DOI: https://doi.org/10.3389/fchem.2022.832972
[8]. V. Klasons, C.M. Lamb, Handbook of batteries, Third edition, McGraw Hill, Chapter 21 (2001).
[9]. Phạm Mạnh Thảo, Doãn Anh Tú, "Nghiên cứu giảm nhiễu điện cho pin nhiệt", Tạp chí hóa học, T. 52(4) 423-428.
[10]. Ronald A. Guidotti, Patrick J. Masset, “Li (negative electrode) thermally activated and Li-alloy thermal” Primary Batteries, (pp.141 - 155) (2009). DOI: https://doi.org/10.1016/B978-044452745-5.00121-0
[11]. Chae-Nam Im, Chi Hun Choi, "Investigation of Li Anode/FeS2 Cathode Electrochemical Properties for Optimizing High-Power Thermal Batteries", Batteries & Supercaps, 3, 1-13, (2020).
[12]. Guidotti, R. A. and Reinhardt, F. W. “Characterization of MgO powders for use in thermal batteries,” Sandia National Laboratories report SAND90-2104, (1996). DOI: https://doi.org/10.2172/380372
[13]. Masset, P. J. and Guidotti, R. A. “Thermal activated (“thermal”) battery technology. part II. molten salt electrolytes”, J. Power Sources, 164 (1), 397, (2006). DOI: https://doi.org/10.1016/j.jpowsour.2006.10.080
[14]. R. Guidotti. “Development history of Fe/KClO4 heat powders at sandia and related aging issues for thermal batteries, SAND2001-2191” Sandia National Laboratories, Albuquerque, NM, USA (2001). DOI: https://doi.org/10.2172/783995
