Study on synthesis of biodegradable polyurea grease using modified vegetable oil
201 viewsDOI:
https://doi.org/10.54939/1859-1043.j.mst.FEE.2022.279-284Keywords:
Polyurea grease; Biodegradable; Lubricant; Modified vegetable oil.Abstract
Lubricants have been applied in numerous industrial fields, as they help reduce friction and heat generated when operating machines and also protect metallic parts in corrosive environments. In some applications, especially in marine, these greases need to be biodegradable, or they get accumulated and can be harmful to aquatic life. To address this matter, modified vegetable oil was used instead of persistent mineral oil. Also, in submerged conditions, polyurea grease outperforms traditional lithium grease as the latter is more susceptible to water washout. So, in this paper, the polyurea thickener was synthesized in-situ in biodegradable modified vegetable oil by using methylene diphenyl diisocyanate and amines as precursors. The fabricated grease chemical properties were determined by FTIR, and its tribological characteristics were studied by dropping point, penetration, and four-ball test. Results showed that polyurea grease has high operational temperature (dropping point at 278 oC), excellent pumpability (penetration 275 mm-1), and offers great wear resistance (wear load 233 kg).
References
[1]. Arnsek, A., Vizintin, L. “Lubricating properties of rapeseed based oils”. Journal Synthetic Lubricant, Vol. 16, pp. 281–295, (2000). DOI: https://doi.org/10.1002/jsl.3000160402
[2]. Jumat, S., Nadia, S., Emad, Y. “Industrial development and applications of plant oils and their biobased Oleochemicals”. Arabians Journal of Chemistry, Vol. 5, pp. 135-145, (2012). DOI: https://doi.org/10.1016/j.arabjc.2010.08.007
[3]. Wilson, B., “Lubricants and functional fluids from renewable sources”, Industrial Lubrication and Tribology, Vol. 50, pp. 6-15, (1998). DOI: https://doi.org/10.1108/00368799810781274
[4]. T.-S. Chang, R. Yunus, U. Rashid. “Palm Oil Derived Trimethylolpropane Triesters Synthetic Lubricants and Usage in Industrial”. Journal of Oleo Science, Vol. 64, pp. 143-151, (2015). DOI: https://doi.org/10.5650/jos.ess14162
[5]. Uosukainen, E., Linko, YY., Lämsä, M. “Transesterification of trimethylolpropane and rapeseed oil methyl ester to environmentally acceptable lubricants”. J Amer Oil Chem Soc, Vol. 75, pp. 1557-1563, (1998). DOI: https://doi.org/10.1007/s11746-998-0094-8
[6]. Robiah Y., Ahmadun F., Tian L., Sunny E., Joseph M. “Lubrication properties of trimethylolpropane
esters based on palm oil and palm kernel oils”. Eur. J. Lipid Sci. Technol. Vol. 106, pp. 52-60, (2004). DOI: https://doi.org/10.1002/ejlt.200300862
[7]. Rokni, K., Mostafaei, M., Dehghani-Soufi, M. “Microwave-assisted synthesis of trimethylolpropane triester (bio-lubricant) from camelina oil”. Scientific Report, Vol. 12, 11941, (2022). DOI: https://doi.org/10.1038/s41598-022-16209-z
[8]. Guanllin Ren, Pengfei Zhang, Xiangyuan Ye, Wen Li, Xiaoqiang Fan, Minhao Zhu. “Comparative study on corrosion resistance and lubrication function of lithium complex grease and polyurea grease”. Friction, Vol. 9, pp. 75-91, (2021). DOI: https://doi.org/10.1007/s40544-019-0325-z
[9]. L. Liu, H. W. Sun. “Impact of polyurea structure on grease properties”, Lubrication Science, Vol. 22, pp. 405-413, (2010). DOI: https://doi.org/10.1002/ls.140
[10]. Guanllin Ren, Xiaowen Sun, Wen Li, Hao Li, Lin Zhang, Xiaoqiang Fan, Dongshan Li, Minhao Zhu, “Improving the lubrication and anti-corrosion performance of polyurea grease via ingredient optimization”. Friction, Vol. 9, pp. 1077-1097, (2021). DOI: https://doi.org/10.1007/s40544-020-0400-3
