Performance improvement of IPM motors by change of rotor shapes-application to electric vehicles
264 viewsDOI:
https://doi.org/10.54939/1859-1043.j.mst.83.2022.1-10Keywords:
Interior permanent magnet motor; Finite element method; Double V magnet; Delta-VI magnet and Torque ripple.Abstract
This paper has investigated the IPM motor from the Tesla rear-drive motor, with the single drive system delivers of 200 kW-450 Nm. This research concentrates on analyzing and evaluating the performances of the electric motor. Both the public data and improved simulation have been used to analyze and compare with the current version. The detailed improvement designs of double V and inverter delta have been implemented for the high constant torque in a wide range speed of electric motor applications. The torque density, torque ripple, and output power are studied by using the finite element method with different structures. In practice, electromagnetic designs of two-layered rotor structures with types of double V and VI magnets are the best choices because this is a simple structure for manufacturing in mass production. For higher torque density and efficiency, the two-layered double V or VI magnets can adjust the sinusoidal step skewing to minimize harmonic components of the torque ripple and back electromotive force.
References
[1]. Z. Rezvani, J. Jansson, and J. Bodin, “Advances in consumer electric vehicle adoption research: A review and research agenda,” J. Transp. Res. Part D: Transport and Environment, vol. 34, pp. 122-136, Jan. (2015). DOI: https://doi.org/10.1016/j.trd.2014.10.010
[2]. K. T. Chau, C. C. Chan, and C. H. Liu, “Overview of Permanent-magnet brushless drives for electric and hybrid electric vehicles,” IEEE Trans. Ind. Electron., vol. 55, no. 6, pp. 2246–2257, Jun. (2008). DOI: https://doi.org/10.1109/TIE.2008.918403
[3]. Y. Yang, et al., “Design and Comparison of Interior Permanent Magn Motor Topologies for Traction Applications,” IEEE Trans. Transp. Electrification, vol. 3, no. 1, pp. 86–97, Mar. (2017). DOI: https://doi.org/10.1109/TTE.2016.2614972
[4]. Huynh TA, Hsieh M-F. “Performance Analysis of Permanent Magnet Motors for Electric Vehicles (EV) Traction Considering Driving Cycles”. Energies. 11(6):1385, (2018). https://doi.org/10.3390/en11061385
[5]. Liu X, Lin Q, Fu W. “Optimal Design of Permanent Magnet Arrangement in Synchronous Motors”. Energies. 10(11):1700, (2017). https://doi.org/10.3390/en10111700 DOI: https://doi.org/10.3390/en10111700
[6]. Çetin, Emrah & Daldaban, Ferhat. “Analyzing the Profile Effects of the Various Magnet Shapes in Axial Flux PM Motors by Means of 3D-FEA”. Electronics. 7. 13. 10.3390/electronics7020013, (2018). DOI: https://doi.org/10.3390/electronics7020013
[7]. Eklund P, Eriksson S. “The Influence of Permanent Magnet Material Properties on Generator Rotor Design”. Energies. 12(7):1314, (2019). https://doi.org/10.3390/en12071314 DOI: https://doi.org/10.3390/en12071314
[8]. Lu, C.; Ferrari, S.; Pellegrino, G. “Two design procedures for PM synchronous machines for electric powertrains”. IEEE Trans. Transp. Electrif. 3, 98–107, (2017). DOI: https://doi.org/10.1109/TTE.2016.2646738
[9]. T. A. Huynh, and M.-F. Hsieh, “Performance analysis of permanent magnet motors for electric vehicles (EV) traction considering driving cycles,” Energies, vol. 15, no. 8, 2711, May (2018). DOI: https://doi.org/10.3390/en11061385
[10]. Y. Wang, N. Bianchi, and R. Qu, “Comparative Study of Non-Rare-Earth and Rare-Earth PM Motors for EV Applications,” Energies, vol. 9, no. 4, 285, Apr. (2022). DOI: https://doi.org/10.3390/en15082711
