Recent advances in thermal imaging and its application in military
312 viewsDOI:
https://doi.org/10.54939/1859-1043.j.mst.89.2023.173-176Keywords:
Thermal imaging; Infrared camera; Gen-generation; HgCdTe detector.Abstract
Infrared cameras are versatile technology studied and utilized in enormous distinct applications ranging from human life-supporting fields such as industrial, building science, and medical to research and development area. Especially the exploitation of thermal imaging of infrared detectors is a potential candidate in military equipment and weapon for observing the target accurately in long-distance with many obstacles. The modification in thermal imaging sensors structure with uncooled and cooled detectors provides new concepts of incredibly sensitive devices with thermal. Here, the technical developments in Gen-generation devices for thermal imaging are discussed and studied outstandingly.
References
[1]. C. Still et al., “Thermal imaging in plant and ecosystem ecology: applications and challenges,” Ecosphere, vol. 10, no. 6, (2019), doi: 10.1002/ecs2.2768. DOI: https://doi.org/10.1002/ecs2.2768
[2]. C. Filippini, D. Perpetuini, D. Cardone, A. M. Chiarelli, and A. Merla, “Thermal Infrared Imaging-Based Affective Computing and Its Application to Facilitate Human Robot Interaction: A Review,” Appl. Sci., vol. 10, no. 8, p. 2924, (2020), doi: 10.3390/app10082924. DOI: https://doi.org/10.3390/app10082924
[3]. X. Wang et al., “Molecular-beam epitaxy-grown HgCdTe infrared detector: Material physics, structure design, and device fabrication,” Sci. China Physics, Mech. Astron., vol. 66, no. 3, p. 237302, (2023), doi: 10.1007/s11433-022-2003-2. DOI: https://doi.org/10.1007/s11433-022-2003-2
[4]. A. Rogalski, P. Martyniuk, and M. Kopytko, “Type-II superlattice photodetectors versus HgCdTe photodiodes,” Prog. Quantum Electron., vol. 68, p. 100228, (2019), doi: 10.1016/j.pquantelec.2019.100228. DOI: https://doi.org/10.1016/j.pquantelec.2019.100228
[5]. Ł. Ciura, M. Kopytko, and P. Martyniuk, “Low-frequency noise limitations of InAsSb-, and HgCdTe-based infrared detectors,” Sensors Actuators A Phys., vol. 305, p. 111908, (2020), doi: 10.1016/j.sna.2020.111908. DOI: https://doi.org/10.1016/j.sna.2020.111908
[6]. A. Koschan, P. Govindasamy, S. Sukumar, D. Page, M. Abidi, and D. Gorsich, “Thermal Modeling and Imaging of As-built Vehicle Components,” (2006), doi: 10.4271/2006-01-1167. DOI: https://doi.org/10.4271/2006-01-1167
[7]. A. Rogalski, “History of infrared detectors,” Opto-Electronics Rev., vol. 20, no. 3, (2012), doi: 10.2478/s11772-012-0037-7. DOI: https://doi.org/10.2478/s11772-012-0037-7
[8]. K. J. H, E. J. Sharp, “Thermal Imaging Techniques to Survey and Monitor Animals in the Wild”. (2016).
[9]. S. Deane et al., “Comparison of Cooled and Uncooled IR Sensors by Means of Signal-to-Noise Ratio for NDT Diagnostics of Aerospace Grade Composites,” Sensors, vol. 20, no. 12, p. 3381, (2020), doi: 10.3390/s20123381. DOI: https://doi.org/10.3390/s20123381
[10]. A. Rogalski, “Infrared detectors: status and trends,” Prog. Quantum Electron., vol. 27, no. 2–3, pp. 59–210, (2003), doi: 10.1016/S0079-6727(02)00024-1. DOI: https://doi.org/10.1016/S0079-6727(02)00024-1
