The study of the effects of bullet material hardness on the penetration capability of a 7.62x39 mm armor-piercing ammunition by numerical simulation method

182 views

Authors

  • Nguyen Dinh Hung (Corresponding Author) Viện Vũ khí/Tổng cục Công nghiệp quốc phòng
  • Tran Van Doanh Military Technical Academy
  • Do Van Minh Military Technical Academy
  • Mai Quoc Vuong Military Technical Academy
  • Bui Xuan Son Military Technical Academy
  • Dang Ba Ngoc Viện Vũ khí/Tổng cục Công nghiệp quốc phòng

DOI:

https://doi.org/10.54939/1859-1043.j.mst.86.2023.137-143

Keywords:

Armor-Piercing ammunition; Hardness; Residual velocity; Penetration capability.

Abstract

This paper presents the results of research on the effect of the bullet material hardness on the penetration capability of a 7.62 x 39 mm two-component K56-type Armor-Piercing ammunition; establishes the rule of the influence of the bullet material hardness on the residual velocity of the bullet after the steel plate and compares the simulation results with the experiment results of 02 samples of real ammunition at the firing range, compare the residual velocity of the bullet after the steel plate between theory and experiment. The research results contribute to the scientific theoretical basis for calculating, designing, and manufacturing 7.62x39 mm Armor-Piercing ammunition with a two-component structure.

References

[1]. Đề tài cấp TCCNQP: “Nghiên cứu thiết kế, chế tạo đạn xuyên giáp 7,62×39 mm”.

[2]. G.A. Đanhilin, V.P. Ogorodnhicov, A.B. Davolocin, “Основы проектирования патронов к стрелковому оружию”, (2007).

[3]. N. V. Thọ, N. Đ. Sại: “Giáo trình Thuật phóng ngoài” – Học viện Kỹ thuật Quân sự, (2003).

[4]. Trần Đình Thành: “Uy lực đạn” – Học viện Kỹ thuật Quân sự, (2003).

[5]. Biswajit Banerjee: “The Mechanical Threshold stress model for various tempers of AISI 4340 steel” – International Journal of Solids and Structures, pp 834-859, (2007). DOI: https://doi.org/10.1016/j.ijsolstr.2006.05.022

[6]. Autodyn Training Course. Ansys Workbench Release, (2006).

[7]. Hallquist, John O. “LS-DYNA theoretical manual. Livermore Software Technology Corporation”, (2006).

[8]. Jane’s Ammunition Handbook 2001 – 2002.

[9]. LA-4167-MS. Selected Hugoniots: EOS 7th Int. Symp. Ballistics. Johnson & Cook, (1969).

[10]. Зукас Дж. А., Киколас Т., Свифт Х. Ф., Грешук Л. Б., Курран Д. Р. И др. Динамика удара: пер. с англ. М., Мир, (1985).

[11]. Высокоскоростные ударные явления: пер. с англ. М., Мир, (1973).

Published

28-04-2023

How to Cite

Nguyễn Đình, H., D. Trần Văn, M. Đỗ Văn, V. Mai Quốc, Bùi Xuân Sơn, and N. Đặng Bá. “The Study of the Effects of Bullet Material Hardness on the Penetration Capability of a 7.62x39 Mm Armor-Piercing Ammunition by Numerical Simulation Method”. Journal of Military Science and Technology, vol. 86, no. 86, Apr. 2023, pp. 137-43, doi:10.54939/1859-1043.j.mst.86.2023.137-143.

Issue

Section

Research Articles