A novel eight-way power combiner on suspended substrate stripline for Ku-band applications
65 viewsDOI:
https://doi.org/10.54939/1859-1043.j.mst.99.2024.44-53Keywords:
Power combiner; Wideband; Suspended substrate stripline.Abstract
This work proposes a novel 8-way power combiner implemented using suspended substrate stripline technology for Ku-band applications. The equivalent circuit of the design is analyzed to obtain parameters for the physical realization of the structure. The combiner is well matched at both input and output ports with VSWR better than 1.6:1, achieves low insertion loss of less than 1dB and isolation of more than 16.8 dB over the range from 12 GHz to 18 GHz. The structure is also able to handle high thermal dissipated power due to its housing, hence, suitable to find application in high power-amplifier subsystems.
References
[1]. Pazoki, R.; Fard, M.G.; Fard, H.G. “A modification in the single-stage wilkinson power divider to obtain wider bandwidth”. In Proceedings of the 2007 Asia-Pacific Microwave Conference, Bangkok, Thailand, 11–14; pp. 1–4, (2007). DOI: https://doi.org/10.1109/APMC.2007.4554813
[2]. Mencia-Oliva, B.; Pelaez-Perez, A.; Almorox-Gonzalez, P.; Alonso, J. “New technique for the design of ultra-broadband power dividers based on tapered lines”. In Proceedings of the 2009 IEEE MTT-S International Microwave Symposium Digest, Boston, MA, USA, 7–12; pp. 493–496, (2009). DOI: https://doi.org/10.1109/MWSYM.2009.5165741
[3]. Yi, K.-H.; Kang, B. “Modified Wilkinson power divider for nth harmonic suppression”. IEEE Microw. Wirel. Compon. Lett., 13, 178–180, (2003). DOI: https://doi.org/10.1109/LMWC.2003.811670
[4]. Lan, X.; Chang-Chien, P.; Fong, F.; Eaves, D.; Zeng, X.; Kintis, M. “Ultra-Wideband Power Divider Using Multi-Wafer Packaging Technology”. IEEE Microw. Wirel. Compon. Lett., 21, 46–48, (2010). DOI: https://doi.org/10.1109/LMWC.2010.2091262
[5]. Womack, C.P. “The use of exponential transmission lines in microwave components”. IRE Trans. Microw. Theory Tech., 10, 124–132, (1962). DOI: https://doi.org/10.1109/TMTT.1962.1125468
[6]. Razzaz, F.; Saeed, S.M.; Alkanhal, M.A.S. “Ultra-Wideband Bandpass Filters Using Tapered Resonators”. Appl. Sci., 12, 3699, (2022). DOI: https://doi.org/10.3390/app12073699
[7]. Ou, X.-P.; Chu, Q.-X. “A modified two-section UWB Wilkinson power divider”. In Proceedings of the 2008 International Conference on Microwave and Millimeter Wave Technology, Nanjing, China; pp. 1258–1260, (2008). DOI: https://doi.org/10.1109/ICMMT.2008.4540663
[8]. Ahmed, O.; Sebak, A.-R. “A modified Wilkinson power divider/combiner for ultrawideband communications”. In Proceedings of the 2009 IEEE Antennas and Propagation Society International Symposium, North Charleston, SC, USA; pp. 1–4, (2009). DOI: https://doi.org/10.1109/APS.2009.5171657
[9]. Zhou, B.; Wang, H.; Sheng, W. “A novel UWB Wilkinson power divider”. In Proceedings of the 2nd International Conference on Information Science and Engineering, Hangzhou, China; pp. 1763–1765, (2010). DOI: https://doi.org/10.1109/ICISE.2010.5690755
[10]. Zhou, B.; Wang, H.; Sheng, W.-X. “A modified UWB Wilkinson power divider using delta stub”. Prog. Electromagn. Res. Lett., 19, 49–55, (2010). DOI: https://doi.org/10.2528/PIERL10101805
[11]. Chiang, C.T.; Chung, B.K. “Ultra wideband power divider using tapered line”. Prog. Electromagn. Res., 106, 61–73, (2010). DOI: https://doi.org/10.2528/PIER10061603
[12]. Jia, Z.; Zhu, Q.; Ao, F. “A 2-way broad-band microstrip matched power divider”. In Proceedings of the 2006 International Conference on Communications, Circuits and Systems, Guilin, China; pp. 2592–2596, (2006). DOI: https://doi.org/10.1109/ICCCAS.2006.285203
[13]. Al Shamaileh, K.A.; Dib, N.; Abbosh, A. “Analysis and Design of Ultra-Wideband Unequal-Split Wilkinson Power Divider Using Tapered Lines Transformers”. Electromagnetics, 32, 426–437, (2012). DOI: https://doi.org/10.1080/02726343.2012.717452
[14]. Razzak, F.; Alkanhal, M.; Sheta, A.-F. “UWB Wilkinson power divider using tapered transmission lines”. In Proceedings of the PIERS Proceedings, Moscow, Russia, (2012).
[15]. Nor, M.Z.B.M.; Rahim, S.K.A.; bin Sabran, M.I.; Rani, M.S.B.A. “Wideband planar Wilkinson power divider using double-sided parallel-strip line technique”. Prog. Electromagn. Res. C, 36, 181–193, (2013). DOI: https://doi.org/10.2528/PIERC12103101
[16]. Al Shamaileh, K.; Almalkawi, M.; Devabhaktuni, V.K.; Dib, N.I.; Henin, B.; Abbosh, A.M. “Non-uniform transmission line ultra-wideband wilkinson power divider”. Prog. Electromagn. Res. C, 44, 1–11, (2013). DOI: https://doi.org/10.2528/PIERC13080807
[17]. Dardeer, O.; Abouelnaga, T.; Mohra, A.; Elhennawy, H. “Compact UWB Power Divider, Analysis and Design”. J. Electromagn. Anal. Appl., 9, 9–21, (2017). DOI: https://doi.org/10.4236/jemaa.2017.92002
[18]. Weng, M.; Song, Y.; Zhao, J. “Design of compact microstrip UWB power divider using square ring multiple-mode resonator”. In Proceedings of the 2015 Asia-Pacific Microwave Conference (APMC), Nanjing, China; pp. 1–3, (2015). DOI: https://doi.org/10.1109/APMC.2015.7411703
[19]. Cohn, Seymour B., “A class of broadband three-port TEM mode hybrids”, IEEE Trans. on Microwave Theory and Techniques, vol. MTT–16, no. 2, pp.110–116, (1968). DOI: https://doi.org/10.1109/TMTT.1968.1126617
[20]. D. M. Pozar, “Microwave Engineering” John Wiley & Sons, Inc, (2012).
[21]. Shu, Yong-hui, Xiao-xia Qi. and Yun-ji Wang, “Analysis Equation for Shielded Suspended Substrate Microstrip Line and Broadside-Coupled Stripline”, IEEEMTT-S International Microwave Symposium Digest, (1987). DOI: https://doi.org/10.1109/MWSYM.1987.1132505
