Preparation of the porous spherical propellant by using the additives of alkali-metal salt
142 viewsDOI:
https://doi.org/10.54939/1859-1043.j.mst.IPE.2024.104-109Keywords:
Spherical propellant; Additive; Alkali-metal salt; Porous spherical propellant.Abstract
This article presents the research results on using some alkali-metal salts as additives in the technological process of making porous spherical propellants and the effects of some of these additives on the porosity and some characteristics of the propellant. The porous spherical propellants are prepared using the emulsion method with additive concentrations of Na2SO4, K2SO4, and KNO3 from 0% to 3%. The important characteristics of the sample were determined, such as heat of combustion (Qv), bulk density (ω), temperature of ignition (Tig), and chemical stability. The porosity is calculated and converted through bulk density and theoretical density. The results show that the sample with the Na2SO4 salt has the best porosity (51÷53%) at concentrations over 2%. The important characteristics of the porous propellant do not change significantly compared to the no-additive spherical propellant.
References
[1]. Colgate S. A., Alamos L., Roos E., "Fast burning propellant". U.S. Patent No. 4,681,643 (1987).
[2]. Li Y., Yang W., Ying S., "Burning characteristics of consolidated gun propellants", Propellants, Explosives, Pyrotechnics, 40, 33-38, (2015). DOI: https://doi.org/10.1002/prep.201400153
[3]. Accurate Arms Company I. - "Accurate smokeless powder". Wolfe Publishing Company, 6471 Airpark Drive, Prescott, AZ 86301, (2000).
[4]. Михайлов Ю., "Физикохимия флегматизированных порохов", Черноголовка. ИПХФ РАН, (2001).
[5]. Botelho F. D., Galante E. B. F., Mendes Á. J. B., "Characteristics and manufacture of spherical smokeless powders", Journal of aerospace technology and management, 7, 398-403, (2015). DOI: https://doi.org/10.5028/jatm.v7i4.466
[6]. Zeigler E. H., "Process for preparing nitrocellulose for use in small arms". U.S. Patent No. 4,031,172 (1977).
[7]. Fung K. F., "Process for preparing free flowing spheroidal nitrocellulose particles". (1997).
[8]. Setiani W. S., Utami M., Yunanda W. W., Muzizah M., Kalasmoro K., Wardani R. M., Ningsih T. G., Suharnoko S., Ruyat Y., Hafizah M. A. E., "The Granulation Methods of Double Base Propellant for Small Caliber Ammunition: A Review", International Journal of Social Science Research and Review, 6, 247-251, (2023). DOI: https://doi.org/10.47814/ijssrr.v6i1.758
[9]. Фиошина М. А., Русин Д. Л. - "Основы химии и технологии порохов и твердых ракетных топлив". РХТУ,(2004).
[10]. Гиндич В., "Технология пироксилиновых порохов", В двух томах. Казань, (1995).
[11]. Ball A. - "Explosive Series, Solid Propellant Part One". AMCP,(1964).
